THE
PF100
Peter Frampton Signature 100W Amplifier
From the man whose sound defined generations comes a new chapter in the Suhr legacy.
The PF100 captures the smooth, sweet, and unmistakable tone of Peter Frampton refined over decades of performance and
perfected in collaboration with John Suhr, whose friendship with Peter began in the early ’80s.
$3,099
3 Channel Versatility
Channel one is a classic American-voiced clean with punchy lows and infinite headroom. It responds beautifully to pedals and features a Crunch mode that pushes it into warm, expressive overdrive when needed.
Channels two and three deliver the ultimate high-gain tones with harmonic richness and sustain that make solos sing. Inspired by Suhr’s legendary modded British circuits, these channels provide everything from thick rhythm crunch to screaming lead tones that cut through any mix.
Mosfet Boost
The high-voltage mosfet boost is located early in the preamp section and can be toggled on any channel. It provides dynamic headroom, enhanced saturation, and harmonic richness. Use it to push the clean channel into overdrive or to fatten the high-gain channels for solos that soar like Peter Frampton’s talkbox leads.
Global Voicing Control
The PF100 integrates seamlessly with advanced switching systems, allowing you to control channels and the independent mosfet boost via MIDI for total command of your rig.
The included footswitch connects and powers through the MIDI jack and allows full remote control of channels and the mosfet boost. Each channel can be preset with the boost on or off, giving you instant tonal flexibility at your feet.
Features
Dual Channel Overdrive/Distortion • Independent Gain, Level, and 3-Band passive EQ controls • Global voice control • True Bypass • Billet aluminum enclosure
Specifications
| US STREET PRICE: | $3,099 USD |
| Output: | 100 watts RMS |
| Preamp Tubes: | 6x 12AX7 |
| Power Tubes: | 4x EL34 |
| Front Panel: | Input, (CH1) Crunch Switch, Bright Switch, Gain 1, Bass, Middle, Treble, Level 1, (CH 2/3): Bright 2/3 Switch, Gain 2, Gain 3, Bass, Middle, Treble, Level 2, Level 3, Boost Switch, Channel Select Switch |
| Back Panel: | Power Select Switch, Fuse / Power Entry Module, Standback/Standby Switch, H.T. Fuse, Speaker Outputs, (16Ω, 8Ω, & 4Ω), Feedback, Presence, Depth Switch, Effects Loop Return Level, In/Active Switch, In Inst. Switch, Send and Return Jacks, Series/Mix Switch, MIDI IN, MIDI THRU |
| Mains Fuse: | 6.25A/100V (Slo Blo) 5A/120V (Slo Blo) 3A/220V (Slo Blo) 2.5A/230V/240V (Slo Blo) |
| H.T. Fuse: | 2A/250V (Fast Blo) |
| Dimensions: | 28.63" (W) X 11.6" (H, with handle & feet) X 9.43" (D) |
| Weight: | 55lbs |
| Footswitch Dimensions: | 11.5” (L) x 3.26” (W) x 1.72” (H) |
| ROHS Compliant: | Yes |
| *All specifications subject to change without prior notice. |



