SUHR HEDGEHOG AMPLIFIER
Steeped in the classic, hot-rodded American tone tradition, the Suhr Hedgehog is designed to offer players the utmost in tonal versatility. The Hedgehog is a modern all-tube, 50 watt single-channel amplifier that features a cascaded overdrive section, four voicings, and a series/parallel effects loop – all of which are easily programmable.
The Suhr Hedgehog is a hot-rodded american sounding amp with modern features and flexibility. The Hedgehog’s unique ability to select and program overdrive, voicing and effects loop options offers players a myriad of clean and overdriven tones from a single-channel amplifier.
PROGRAMMABLE VOICING
Flexible voicing switches are accessible via the front panel and stored in presets. The voicing options include an overdrive gain stage, two levels of deep boost, mid and bright. Save presets of your voicing, boost, and effects loop modes for instant recall via the included 4 button footswitch or third-party MIDI controller.
BOOST AND EFFECTS LOOP
A gain boost is selectable and programmable from the front panel along with the mode of the effects loop, which can operate in series or parallel modes.
MADE IN THE USA
Hedgehog is made in our Lake Elsinore, CA factory in the United States using a combination of circuit board and point-to-point wiring, producing an amp that is reliable and easy to service.
MADE IN THE USA
Hedgehog is made in our Lake Elsinore, CA factory in the United States using a combination of circuit board and point-to-point wiring, producing an amp that is reliable and easy to service.
BOLD POWER SECTION
The cascaded single channel preamp is fed into a clean and bold 50 watt 5881 power section.
ALSO AVAILABLE!
SUHR HEDGEHOG 2×12 CABINET
Featuring 130 watts of power handling and loaded with Celestion G12-65 speakers, the matching Hedghog 2×12 speaker cabinet has been tuned to perfectly match the Suhr Hedgehog head.
FEATURED VIDEOS
SPECIFICATIONS
Street Price: | $3,099 |
SKU: | A-HH |
Output: | 50 watts RMS |
Channels: | Single channel with two modes and programmable tone buttons. |
Preamp Tubes: | 4x 12AX7 |
Power Tubes: | 2x 5881 |
Front Panel: | Input, Volume, Treble, Middle, Bass, Gain, Level, Master, Presence, Bright, Boost, Mid, Deep, Series, Mix, Store, On/Standby and On/Off |
Back Panel: | MIDI: Thru, In/FS, 2 x Speaker Outputs, Impedance Selector:(4Ω, 8Ω, & 16Ω) Effects Loop: Return Level, Return, Send, Loop Level (INST/LINE), HT Fuse, Mains Fuse and Mains Input Inlet |
Footswitch Dimensions: | 22 ⅝ ” (W) x 10.5” (D) x 9” (H) |
Weight: | 44lbs |